An EMC test is known as Electromagnetic compatibility, a certification for electronic devices to maintain their limitation of electromagnetic waves. As discussed in the previous article, there are two types of EMC tests: emission (EMI) and immunity (EMS). EMI (Electromagnetic Interference) tests measure the magnetic waves emitted by the device, and EMS (Electromagnetic Susceptibility) tests […]
Analog IC Tips
The basics: What is EMC?
EMC stands for Electromagnetic compatibility, which means that a device is compatible with (i.e., no interference is caused by) its electromagnetic (EM) environment. It does not emit levels of EM energy that generate electromagnetic interference (EMI) in other devices in the vicinity. Electromagnetic interference (EMI) is the interference caused by one electrical or electronic device […]
Socket for LGA1156 packages handles extreme temperatures, provides superior electrical performance
A new LGA socket addresses high-performance requirements for 1-mm-pitch LGA1156 devices. The CBT-LGA-5036 contains a contactor that is a stamped spring pin with 19-gm actuation force per pin and features a cycle life of 125,000 insertions. The self-inductance of the contactor is 0.93 nH, insertion loss is less than 1 dB at 23 GHz, and […]
10 straightforward ways to reduce PCB assembly costs without compromising PCB quality
by Ken Ghadia, Sales Engineer, TechnoTronix It is difficult to build a quality product at the lowest cost. The quality of a PCB depends on the competence of its design for assembly, testing, repair, reliability, manufacturing, and yield. Several factors impact the cost of a PCB assembly. However, the designers can consider certain factors that […]
Sockets for LGA255 packages handle 94 GHz frequencies
A new LGA socket design uses a high-performance elastomer capable of 94 GHz and sports a low inductance for test applications. The GTP-LGA-1003 socket is designed for a 17×17-mm package size, 16×16 array, 1-mm-pitch and operates at bandwidths up to 94 GHz with less than 1 dB of insertion loss. The contact resistance is typically […]
Radiation tolerant 20-GHz SPDT absorptive RF switch targets space applications
Teledyne e2v HiRel announces the availability of a rad-tolerant 20 GHz, Single Pole Double Throw (SPDT) absorptive RF switch, model TDSW020A2T, that is ideal for use in demanding high reliability, space and defense applications and is now available with qualified material off-the-shelf. This new RF switch, developed on 0.15 μm InGaAs pHEMT technology, will be available […]
Gap filler pads offer performance of 3.2 W/m-K thermal conductivity
Parker Hannifin Corporation announced the launch of THERM-A-GAP PAD 30 and THERM-A-GAP PAD 60, the next generation of thermally conductive gap filler pads from Parker Chomerics. With the performance of 3.2 W/m-K thermal conductivity, THERM-A-GAP PAD 30 reliably conforms to rough surface irregularities and air gaps on heat-generating components. For higher performance applications, THERM-A-GAP PAD […]
Double-latch open-top sockets handle QFP208 chip packages
A new stamped-spring pin socket addresses high performance requirements for testing 208- lead Quad flat pack packages. The CBT-QFE-3028 socket contains a contactor with a stamped-spring pin construction with a 17-gm actuation force per ball and cycle life of 10,000+ insertions. The self-inductance of the contactor is 0.88 nH, insertion loss < 1 dB at […]
From designing to operating an RF PCB: The complete guide
by Ken Ghadia, Sales Engineer, TechnoTronix Radio Frequency (RF) PCBs are very high-speed circuits operating at frequencies in the range of 100MHz and above, typically from 500MHz to 2 GHz. RF PCBs are the backbone of wireless networks, high-tech gadgets like smartphones, smart TVs, etc. Also, RF PCBs are used in automotive, medical equipment, military, […]
PCB design tool suite users get access to extensive PCB parts library
Zuken and SnapEDA are announcing a new capability that provides users of Zuken’s eCADSTAR PCB Design Tool Suite with direct access to SnapEDA’s comprehensive online library. Using eCADSTAR’s embedded internet access, PCB designers can search and download from SnapEDA’s library of electronic component models. The models include symbols, footprints, and 3D models that can be […]