Murata Power Solutions announced today
additions to its UEI25 series of 25W output, 2:1 input range, high efficiency,
isolated DC-DC converters. Featuring 25W output in one square inch of board
area, the new devices add +3.3VDC and +5VDC output models to the series. A
+12VDC model was launched in 2010. All converters can now be specified in
either surface mount or through-hole packages.
The low-profile converters, measuring just 24.38
x 27.94 x 8.13mm (0.96 x 1.1 x 0.32 inches), accept a 2:1 input voltage range
of +36 to +75VDC, ideal for telecom equipment. The series also features an
output trim function that allows the output to be trimmed up or down by 10%
with an external trim resistor. The highly efficient operation, of up to 91%,
ensures minimal heat buildup without the need for a fan-assisted air flow.
These DC-DC converters include full
magnetic isolation with Basic insulation, up to 2250VDC. For powering digital
systems, the outputs offer fast settling to step transients and will accept
higher capacitive loads. Excellent ripple and noise specifications assure
compatibility to noise-susceptible circuits. For systems requiring controlled
startup/shutdown, an external remote on/off control may use a switch,
transistor or digital logic.
Self-protection design features prevent both
converter and external circuit fails. These include input undervoltage lockout
and overtemperature shutdown. The outputs current limit using the ‘hiccup’
autorestart technique and the outputs are short-circuit protected. Additional
features include output overvoltage and reverse conduction elimination.
The UEI25 series’ industry-standard pinout
makes this part a direct replacement for larger 1″ x 2″ converters.
Applications include small instruments, area-limited microcontrollers, data
communications equipment, remote sensor systems, telephone equipment, vehicle
and portable electronics. It operates in the industrial temperature range of
-40 to +85 degrees C.