Custom MMIC has just released the CMD291, a new wideband Driver Amplifier MMIC. The CMD291 is a wideband GaAs MMIC driver amplifier die which operates from 16 to 24 GHz. The CMD291 delivers 22.5 dB of gain with a corresponding output 1 dB compression point of +26 dBm and output IP3 of 32.5 dBm at […]
Wideband GaN Low Noise Amplifier Operates with High Input Power Survivability
Custom MMIC has just released the CMD290, a new wideband GaN Low Noise Amplifier (LNA) MMIC. The CMD290 operates from 2 to 26 GHz, and delivers 12.5 dB of gain with a corresponding noise figure of 2.3 dB and an output 1 dB compression point of +19 dBm at 13 GHz. This GaN LNA features […]
GaAs Digital Step Attenuators Ease The Design Process
Custom MMIC has launched a new product line of GaAs Digital Step Attenuators (DSA). The DSA family is intended to ease the design of high dynamic range receivers and instrumentation. These applications often must accomplish gain control of 50dB or more. Fine step DSAs (e.g., 0.5dB Least Significant Bit [LSB]) are often used for these applications. […]
Mixers Offer Low Conversion Loss And High LO To RF Isolation Up To 26 GHz
MMIC Mixers Offer Low Conversion Loss, High LO To RF Isolation
Custom MMIC announces a new series of high performance IP3 fundamental mixers, CMD253C3, CMD254C3, and CMD255C3. This new series of mixers features overlapping RF/LO frequencies spanning 6 GHz to 26 GHz, with each model demonstrating low conversion loss high IP3, high isolation, and wide IF bandwidth. These mixers are well suited for use as upconverters […]