Two new Power over Ethernet (PoE) Powered Device (PD) families called the Si3406x and Si3404 families include all necessary high-voltage discrete components on a single PD chip. The new PD ICs support IEEE 802.3 at PoE+ power capabilities, flexible power conversion options exceeding 90% efficiency, robust sleep/wake/LED support modes, and superior EMI immunity. These capabilities […]
Automotive radar test gear verifies automotive radar systems technology
The Keysight E8740A Automotive Radar Signal Analysis and Generation Solution enables radar-based, advanced driver assistance systems to proactively detect and mitigate risks of collisions. The Keysight E8740A automotive radar signal analysis and generation solution leverages Keysight’s leadership in mmWave technology providing signal analysis from 3 Hz to 110 GHz in a continuous sweep. It performs […]
PXIe radio test set covers emerging land mobile radio, aerospace/defense military communications
The new Keysight M8920A PXIe Radio Test Set provides audio and RF frequency coverage from 100 kHz to 6 GHz and modulation bandwidth up to 160 MHz for generation and analysis of simple to complex waveforms used in emerging Land Mobile Radio (LMR) and aerospace and defense military communications (MilCom) applications. Keysight has partnered with […]
Power electronics models, analyzers address HEV/EV, solar applications
The Keysight PD1000A Power Device Measurement System for Advanced Modeling and the W8598BP/BT Power Electronics Model Generator Software are new tools for modeling and simulation of power electronics devices. Keysight is partnering with industry leaders in the HEV/EV power-conversion market to help them transition smoothly towards the use of wide band gap devices in their […]
Richardson Electronics to distribute products from 3Rwave
Richardson Electronics, Ltd. will begin distributing products from 3Rwave Co. Ltd., a manufacturer specializing in microwave ferrite devices including isolators and circulators with frequency ranges up to 40 GHz and 20 kW. Richardson Electronics is a global channel partner for RF and microwave components, power electronics, and world-class electron devices. As a global company, Richardson […]
DC-DC converters target renewable energy applications
A new line of dc-dc converters range from 5 to 40 W. The AE series, available in board mount, chassis mount, and DIN-rail-mount configurations, offers power ratings of 5 W, 10 W, 15 W and 40 W with input voltages up to 1,500 Vdc and input ratio ranges up to 10:1. Designed for reliable operation […]
Surface-mount solid-body fuses get QPL status
The FM13 series of surface-mount solid body fuses have earned inclusion in the of Defense Logistics Agency’s Qualified Parts List (QPL). The FM13 series are the only parts in its class to attain QPL status in compliance with the MIL-PRF-23419/13 high-performance standard. AEM’s high-reliability FM13 series features a precision thick-film fusible element with a glass […]
Transformers handle PoE++ power levels
A new series of EPCOS transformers is designed for an output of up to 60 W, which are therefore suitable for PoE++ according to IEEE 802.3bt. The new B82806D0060A** series comprises four types with different turns ratios for output voltages of 3.3, 5, 12, and 24 V. The SMD components have dimensions of 30x22x11.4 mm […]
Conduction/convection cooled supplies only 31-mm high handle 206-W peak loading
The TDK-Lambda CUS200LD ac-dc power supply, rated at 120 W convection or 150 W conduction cooled, can deliver up to 206 W for up to 10 seconds to drive peak loads associated with dynamic LED displays. The product’s 31-mm height allows the product to be mounted inside low profile signage, or industrial equipment with limited […]
Multi-device synchronization for lock-in amplifiers and arbitrary wave generators
A new Multi-device Synchronization function (MDS) allows multiple instruments to be connected together and controlled on one user-friendly interface. The MDS takes care of the synchronization of both the 10 MHz clock and the sampling rates of each connected instrument. Instead of using one multi-channel instrument, single instruments can be added as required and subsequently […]