See and learn how mmWave and beamforming works before you design mmWave beamformers and up/down converters using Anokiwave’s Active Antenna Evaluation Kit.
Why mid-band spectrum suits 5G
The 5G mid-band spectrum offers a compelling balance of capacity and coverage necessary for new applications and use cases.
Calibration method improves 5G base station test accuracy
Rohde & Schwarz updates R&S PWC200 to provide better accuracy and wider frequency range in 5G FR1 base station OTA testing.
Why 5G needs over-the-air testing
Over-the-air testing requires different antenna setups for 5G FR1 and FR2. Temperature is a significant factor in calibration and validation.
Book review: Measuring History, the NI story
Get the early history of National Instruments (NI) with emphasis on GPIB and LabVIEW, and how the founders created a winning culture.
Development kit connects to cellular networks
The B-L462E-CELL1 Discovery kit from STMicroelectronics lets to add cellular connectivity to your IoT device before committing to designing in the meodem. When adding cellular connectivity to an IoT device, you’d like first to demonstrate the ability to connect to a cellular network and transmit data. With the B-L462E-CELL1 Discovery Kit from STMicroelectronics, you can…
5 tips for designing with embedded antennas
Designing an antenna into a wireless embedded or IoT device requires special care to maximize performance.
IoT connectivity: 4G or 5G?
5G Technology World interviews Harald Remmert of Digi International on connecting IoT devices over cellular networks. See the video.
Renesas adds three timing ICs for 4G/5G radios
The 8V19N850 radio synchronizer and 8V19N880/8V19N882 jitter attenuators enhance a radio unit’s timing capabilities.
Wi-Fi/Bluetooth modules offer pad or chip antennas
The Innophase INP1012 and INP1013 modules run on little power, saving battery time in IoT devices.