Advanced Energy Industries announced the company’s first non-isolated bus converter (NIBC) in industry-standard quarter-brick format for 48 V power conversion in compute and telecom applications. Operating at up to 900 W with efficiencies as high as 97%, the new Advanced Energy Artesyn NDQ900 DC/DC converter provides a single, regulated 12.25 V output and incorporates a […]
Industrial
Automotive-grade chip resistors excel at handling pulses
High-reliability chip resistors can be more difficult to find and even more so when there are pulse handling requirements. Typically, the manufacturing process for thick film chip resistors allows for variation in the calibration trim, leading to variation in pulse handling performance. Stackpole’s recently released RPCA series addresses all these needs. The RPCA has limited to […]
World’s highest-power MEMS switch handles 10 A
The new MM9200 is the world’s first micromechanical power switch capable of handling 10 A in a miniature 5×5-mm surface-mount package. With its ultra-low 0.010-Ω contact resistance, the new MM9200 is said to be the lowest-loss and highest power capable micro-mechanical switch ever created. The MM9200 targets a wide range of applications including industrial automation, […]
2×4-in 250-W industrial/medical power supplies can be convection or conduction cooled
TDK Corporation announces the introduction of the 250W-rated TDK-Lambda brand CUS250M series of power supplies in the industry standard 2” x 4” footprint. The product’s mechanical configurations enable both convection and conduction cooling through the product’s baseplate to provide silent cooling. The CUS250M is certified to the industrial IEC 62368-1 and medical IEC 60601-1 standard […]
6MHz rail-to-rail op amps boost performance in industrial and automotive apps
STMicroelectronics is simplifying designers’ search for high-performing operational amplifiers (op amps) by introducing three new 6MHz rail-to-rail devices with strong all-around parameters including a wide operating voltage range and low noise. The TSB511, TSB512, and TSB514 are single, dual, and quad op amps, respectively. They can operate from a single supply in the range from 2.7V to […]
High-density power supplies available in 32mm x 70mm packages
OmniPro Electronics has announced the release of the Altech Ultra-Compact PSC family of power supplies. The series has five models ranging from 75 to 480W of available power, with some of the highest power density in the industry, ranging from 32mm wide (75W) to 70mm wide (480W). All models have a universal input voltage range […]
Resonant power inductors handle up to 3 kW
ITG Electronics has introduced a new series of resonant inductors. Suitable for DC/DC power conversions of up to 3 kilowatts, the company’s L101374SP Series of Resonant Inductors comprises 13 distinct high-performance products. They are ideal for power conversion application in data centers, electric vehicles and industrial settings. The L101374SP Series of Resonant Inductors was initially developed […]
I²C IO expander, buffer targets automotive-grade applications
Novosense Microelectronics has recently launched a variety of automotive-qualified IC products, including I²C GPIO expansion chip, 40V multi-channel half-bridge driver and three-state buffer for automotive, industrial, and other applications. NOVOSENSE automotive-qualified I²C IO expander NCA9539-Q1 provides up to 16 bits of GPIO expansion for I2C bus, which is widely used in automotive infotainment system, automotive […]
AEC-Q102-qualified linear optocoupler feature isolation voltage of 5300 Vrms
Vishay Intertechnology, Inc. introduced the industry’s first AEC-Q102 qualified linear optocoupler. Offering industry-high isolation voltage of 5300 Vrms, the Vishay Semiconductors VOA300 provides a response time that is five times faster than competing devices, while delivering increased transfer gain stability of ± 0.005 %/°C typical and a single-ended output for design flexibility. The Automotive Grade device […]
Board-to-board connectors meet automotive and industrial standards
Interplex has just released its multi-row board-to-board (BTB) connector product with a proprietary snap-in biscuit design allowing multiple connector units to be stacked together. This means interconnections can be appropriately sized while avoiding the need for them to be custom-built. The unique cost-effective approach that Interplex has taken will enable different pin count requirements to […]