By Stephen Oxley, Senior Engineer Applications and Marketing, TT Electronics Lead has long been recognized as a serious environmental hazard. It has a detrimental effect on the workings of the human central nervous system, and this is particularly acute when children are exposed to it. Based on the findings of scientific research conducted during the […]
FAQ
Choosing a capacitor? Ripple current capability matters as much as Farads
by Derick Stephens, KEMET Corporation Selecting capacitors for decoupling and filtering in power circuits may seem like a basic chore for electronics designers. Getting it right, however, can critically influence reliability and longevity, but is complicated by the fact that parameters tend to change with factors such as the temperature and operating frequency. Proper attention should […]
Heat sinks, Part 1: Thermal principles
A heat sink is a non-electronic, passive mechanical component that has a vital role in the reliability and performance of ICs, PC boards, modules, chassis, and more. Heat sinks often don’t get much attention, at least not in the early stages of a design. This FAQ will look at the basic thermal principles of these […]
Synthesized tuning, Part 1: Basic frequency-synthesizer principles
Frequency synthesizers of various architectures, made possible by IC technology, are a key building blocks for applications which must accurately tune multiple channels, and hop from one frequency to another while using a single signal source such as a crystal oscillator. When you want to tune a desired radio station — AM or FM — […]
Challenges in designing electronics for satellites
In 1957, the Russians launched Sputnik 1, which was no more than a metal ball containing a radio, a battery, and a thermometer.[i] However, this experiment provoked a spark that led to decades of space missions. The earliest satellite designs were huge, heavy, and functionality was limited. Nevertheless, satellite designs started evolving with the passage […]
Three-phase testing basics – Mitigating harmonic current
An electrical conductor warms up when it conveys current. If the heat is high enough the conductor can be damaged, so it is beneficial to limit current flow. Three-phase electrical distribution systems are highly effective in limiting current flow without reducing the amount of power delivered to the load. They do this by separating phases […]
Gravity-assist “Slingshot,” Part 2: Application
A graduate student worked out the principles of using a planet’s mass to accelerate and adjust the voyage of spacecraft traversing our solar system; without it, the voyages of interplanetary probes would be impractically long. Part 1 of this FAQ scoped out the basic problem of completing interplanetary missions within a manageable time, and how […]
Gravity-assist “Slingshot,” Part 1: Background and principle
A graduate student worked out the principles of using a planet’s mass to accelerate and adjust the voyage of spacecraft traversing our solar system; without it, the voyages of interplanetary probes would be impractically long. If you follow the news about the various interplanetary probes launched by NASA, the European Space Agency (ESA) and others […]
Programming AVR microcontrollers and Arduinos using the Arduino ISP
All microcontrollers (MCUs) require some sort of mechanism to program them, even if they only get programmed once. Typically, program code is written on a host computer, then it is compiled or translated, and object (machine-readable) code is downloaded to the MCU (“the target”) from the PC (“the host”) using a cable (usually USB or […]
Power management ICs, part 2: PMIC implementations
The power management IC (PMIC) is often a vital part of the lower-voltage DC subsystem, as circuits have multiple power rails with tight individual specifications as well as mandated relationships among them. Part 1 of this FAQ discussed the need for, PMICs and their general characteristics. Part 2 now looks at specific ICs which implement […]