If a semiconductor or vacuum tube is to accurately reproduce or amplify signals on its input, it must have on its input a non-time-varying dc voltage, i.e. dc bias, the purpose of which is to keep the device in its linear operating range. Otherwise, the input signal to be reproduced may drive the device beyond […]
The nuts and bolts of verification: Recasting SystemVerilog for Portable Stimulus
by Matthew Balance, Mentor, a Siemens Business Nuts and bolts. So prosaic, yet so fundamental and essential. They can be reused, mixed-and-matched in endless ways. All those old jars and tins full of leftover nuts, bolts, and screws have saved many trips to the hardware store. Yet, if not for standardized gauge, thread count, and […]
Simulation software handles beamforming and throughput for MIMO systems
Remcom announces a new capability to simulate beamforming and throughput for MIMO systems in Wireless InSite 3D Wireless Prediction Software. The new release provides customers designing base stations and WiFi devices with a critical metric for analyzing real-world device performance in indoor or 5G dense urban outdoor environments. The software has also been updated to simulate key MIMO […]
Trace visualization tool now supports On Time RTOS-32
Percepio announces that Tracealyzer 4 support for On Time RTOS-32, in addition to the already supported Amazon FreeRTOS, Keil RTX5, Micrium µC/OS-III and SafeRTOS/OpenRTOS. “Tracealyzer 4 is a massive improvement over previous versions. We have collaborated with On Time for more than five years and we are excited to now bring the next generation in […]
FPGA development kit offloads and accelerates image-processing systems
Matrox Imaging is pleased to announce the arrival of the Matrox FDK, a powerful development kit for the Matrox Rapixo CXP Pro family of frame grabbers, based on Xilinx Kintex UltraScale devices. The Matrox FDK helps developers harness the full power and flexibility of FPGAs for image processing. Used in combination with Xilinx Vivado Design […]
IDE provides actionable insights for SoC development and debug
UltraSoC today announced UltraDevelop 2, a complete integrated development environment (IDE) that combines comprehensive debug, run control, and performance tuning with advanced visualization and data science capabilities for system-on-chip (SoC) development teams. Incorporating technology from UltraSoC partners Imperas and Percepio, UltraDevelop 2 provides actionable insights to dramatically cut development costs, shorten time-to-revenue and improve product […]
Development board adds Google Cloud to embedded applications
Creating cloud-connected applications traditionally can require significant time and resources for embedded designers to develop necessary expertise in communications protocols, security and hardware compatibility. Developers often overcome these challenges with large software frameworks and Real Time Operating Systems (RTOS), which results in increased development time, effort, cost and security vulnerabilities. Microchip Technology Inc. today announced a […]
Probe helps program/debug STM8, STM32 MCUs
STMicroelectronics has introduced the next-generation STLINK-V3 probe for programming and debugging STM8 and STM32 microcontrollers, adding enhancements to further increase flexibility and efficiency. Now featuring mass-storage support, a virtual COM port with multipath bridge, and three-times faster write performance, the competitively priced STLINK-V3 saves development time and easily reprograms devices in the field. In addition to providing typical JTAG/Serial-Wire Debug […]
PIC IDEs now support AVR MCUs
Designers who have traditionally used Microchip’s PIC microcontrollers (MCUs) and developed with the MPLAB ecosystem can now easily evaluate and incorporate AVR MCUs into their applications. The majority of AVR MCUs are now beta supported with the release of MPLAB X Integrated Development Environment (IDE) version 5.05, available today from Microchip Technology Inc. Support for additional […]
Cellular LTE-M development kits feature LPWAN software-defined technology-agile modems
Digi International today announced the immediate availability of the Digi XBee3 Cellular LTE-M development kits, featuring Digi’s next-generation smart cellular modem. This LTE-M certification, to be followed by the certification of Digi XBee3 Cellular NB-IoT in October 2018, allows Digi to bring one of the first LPWAN, software-defined technology-agile modems capable of offering Cat-M or NB-IoT […]
- 1
- 2
- 3
- …
- 20
- Next Page »
@eeworldonline
EE World Online
YouTube
Instagram