Binder-USA is now offering M12 and 7/8″
field-attachable connectors with larger screw clamp terminations. This change
will allow the connectors to accept wires up to 14 AWG. The ability to use a
larger wire gauge make the connectors suitable for connecting power
applications typically found in industrial environments.
The Series 713 M12 connectors with 4- and 5-pins can now be
terminated with 16 AWG wires and a maximum cable diameter of 10 mm. After
increasing the wire gauge it is possible for the connectors to conduct currents
up to 8 A per contact. Both male and female versions are available in straight
form and are intermateable with all 4- and 5-pin A-coded versions.
The Series 820 7/8″ connectors with 5-pins can now be
terminated with 14 AWG wires and a maximum cable diameter of 14 mm. By
increasing the size of the cable clamps it is now possible for the connectors
to withstand currents up to 12 A per contact. Male and female connectors with
straight and angled forms are available with the larger screw terminations.
All Binder M12 and 7/8″ connectors are IP67 rated when
connected to their mating parts. Binder-USA offers mating cordsets, receptacles
and field-attachable connectors for a complete connecting system.