Mill-Max has added right angle options to our line of .070”
(1.78 mm) pitch connectors. These single row right angle sockets and headers
can be combined with vertical 0.07 in. (1.78 mm) pitch connectors for a variety of
interconnect configurations. Additionally, the .070” (1.78 mm) pitch spacing
allows for higher density packaging than .100” (2.54 mm) pitch, while providing
the same current carrying capacity and mechanical strength.
The right angle header and socket pair are perfect for board
edge daisy chain applications or mix and match with vertical sockets and
headers to mate boards perpendicular to each other. The 871 series right angle
sockets are designed to accept device leads as well as mate with the 870 header
series. These sockets allow for versatility in orientation of display &
imaging chips built on the Shrink DIP platform. Another feature of the 870
& 871 series interconnects is that they provide a low profile above board height
of just .104” (2.64 mm.)
The 870-10-0XX-20-001000 and 871-43-0XX-20-001000 are
available in 2 -21 positions (XX=02-21) and are RoHS compliant: sockets have
tin-plated shells and gold-plated contacts; headers have gold-plated pins. Hard
gold-plating, on both the 870 series header pins (10u”) and the 871 series
receptacle internal contacts (30u”), provides optimum conductivity and
effective wear resistance. Both connectors have high temperature insulators
suitable for RoHS soldering processes.
All Mill-Max pin headers and receptacle sockets feature
high-speed screw machined pins and receptacles manufactured to precision
tolerances. Inside each 871 series receptacle is a precision stamped Beryllium
Copper Mill-Max #30 contact clip with a pin acceptance range of .015-.025” (.38
mm – .63 mm) diameter and a current rating of 3 amps.
