A Sensor Acquisition Module (SAM40) works exclusively with the Teledyne LeCroy 12-bit HDO family of scopes. The SAM40 provides up to 24 input channels for low frequency (sensor signal) acquisition and analysis. It connects to a 4 or 8-channel Teledyne LeCroy 12-bit resolution high-definition oscilloscope (HD4096 HDOs and MDAs) to provide Analog+Digital+Sensor (up to 8+16+24 channel) acquisitions. Connections are via a USB2.0 cable for data transfer and control/trigger commands, and BNC cables for clock/timebase synchronization. No programming or complex setups are required.This capability is helpful for system debug and analysis of deeply embedded, electromechanical, and mechatronic designs in the medical, mil/aero, motors and drives, power, appliance, Internet of Things (IoT), vehicle/automotive and other applications.
An HDO with a sensor acquisition module economically replaces multiple instruments with one consolidated view of system performance. Key Features include 8, 16 or 24 input channels, 24-bit resolution, 40 kHz bandwidth (100 kS/sec), and plug-and-play with supported HDO. More than 65 different SI and English system physical units are supported for length, mass, temperature, angle, velocity, acceleration, volume, force/ weight, pressure, electrical, magnetic, energy and rotating machine quantities. Math and measurements applied to rescaled waveforms correctly read and convert to new units as required.
More info: Teledyne LeCroy, 700 Chestnut Ridge Road, Chestnut Ridge, NY 10977-6499, (800)-553-2769 or (845)-425-2000, https://teledynelecroy.com/options/default.aspx?categoryid=34&groupid=228&capid=102&mid=1152
Leave a Reply
You must be logged in to post a comment.