Part 1 of this FAQ looked at the basic issues associated with cooling and heat sinks. Part 2 focuses on the various heat sinks available. Q: Are heat sinks limited to a single component such as an IC? A: No, there are heat sinks which fit entire unit or chassis cool such as those which […]
basics
Synthesized tuning, Part 2: Advanced synthesizers and performance
Part 1 of this FAQ looked at the basic issues and topologies related to the challenge of frequency synthesis. Part 2 continues with advanced approaches and their attributes, as well as general concerns when choosing a synthesizer. Q: Are there other digitally-controlled synthesizer topologies? A: Yes. A widely used one is called the classical phase […]
Choosing a capacitor? Ripple current capability matters as much as Farads
by Derick Stephens, KEMET Corporation Selecting capacitors for decoupling and filtering in power circuits may seem like a basic chore for electronics designers. Getting it right, however, can critically influence reliability and longevity, but is complicated by the fact that parameters tend to change with factors such as the temperature and operating frequency. Proper attention should […]
3D NAND Flash memory: Making HDDs obsolete in a data-centric world
A data-centric economy is evolving. The Samsung Galaxy Note 9 debuted with 8 GB RAM and one terabyte (TB) of storage (purchasing a 512 GB SD card bumps it to 1 TB). The price tag is well over $1,000, so the rest of us will have to buy 1 TB of cloud storage from Google […]
Programming AVR microcontrollers and Arduinos using the Arduino ISP
All microcontrollers (MCUs) require some sort of mechanism to program them, even if they only get programmed once. Typically, program code is written on a host computer, then it is compiled or translated, and object (machine-readable) code is downloaded to the MCU (“the target”) from the PC (“the host”) using a cable (usually USB or […]
Power management ICs, part 2: PMIC implementations
The power management IC (PMIC) is often a vital part of the lower-voltage DC subsystem, as circuits have multiple power rails with tight individual specifications as well as mandated relationships among them. Part 1 of this FAQ discussed the need for, PMICs and their general characteristics. Part 2 now looks at specific ICs which implement […]
Wheatstone bridge, Part 2: Additional considerations
Part 1 of this FAQ explained the basic principle of the Wheatstone bridge. This part will take the bridge configuration into modern applications and go beyond basic resistance measurements. Q: All this measurement via changing resistance or by measuring current seems very slow or static; how does it fit into today’s electronics? A: Frist, many […]
Low cost, low latency PCIe ideal for sharing resources
Peripheral Component Interconnect Express (PCIe) is more than just a high-speed serial bus that’s widely used in computers. PCIe is also found in some embedded systems and is a cost-effective, high performance, reliable, low-latency, and low power bus that can rapidly transfer data directly between PCIe-connected devices. PCIe-connected devices are typically CPUs, GPUs, FPGAs, PCIe-connected […]
Power Management ICs, part 1: PMIC functions
The power management IC (PMIC) is often a vital part of the lower-voltage DC subsystem, as circuits have multiple power rails with tight individual specifications as well as mandated relationships among them. It’s one thing to develop needed low-voltage DC rails via DC/DC converters or regulators, but there’s also a need to manage these power […]
Wheatstone bridge, Part 1: Principles and basic applications
Although the electronics industry is relentlessly driven by advances in materials, components, and architectures, the “new” obviously also builds on the “old” and often still uses it, albeit in new guises. There’s still a viable place and need for old devices such as the transformer, solenoid, relay, and Wheatstone bridge. This FAQ will look at […]