Bourns, Inc. announced two new low-profile, high current series of compact surface mount common mode chokes. The new SRF1206A and SRF9045A series provide not only common mode but also differential mode filtering in a single choke configuration. These highly robust products offer high current capacity to answer the need for components that meet board space constraints in an increasing number of […]
Bourns
Current-compensated dual choke filter inductors handle high currents
Bourns, Inc., a leading manufacturer and supplier of electronic components, introduced the Model DR334A Line Filter Series. These current-compensated dual choke filter inductors feature higher current capability than typical standard signal line common mode chokes, as well as high stray inductance and differential mode noise rejection. These capabilities make the Model DR334A series ideal line […]
Single component combines overcurrent/overvoltage protection for RS-232, modem lines
Bourns, Inc. introduced its high-speed Model TBU-RSxxx-300-WH series protectors for use in RS-485 communication interface applications and AISG (Antenna Interface Standards Group) modem protection. Offering a dual-channel solution, the two models (TBU-RS055-300-WH and TBU-RS085-300-WH) in the series are capable of protecting both twisted-pair RS-485 lines in a single product. Integrating a Transient Blocking Unit overcurrent protector […]
Space-saving thick-film resistors span 1 ohm to 20M ohm
Bourns, Inc. announced the availability of a new AEC-Q200 compliant series of thick film chip resistors. Bourns continues to take a leading role in introducing space-saving resistor products by offering its latest Model CRxxxxA series in eight compact form factors — from small 0201 (0603 Metric) up to 2512 (6431 Metric). The CRxxxxA series is part of […]
Shielded power inductor line features low resistance, high saturation current
Bourns, Inc. announced 11 new low resistance, high saturation current model series to its shielded power inductor line. Featuring a very low profile (less than 2 mm), the Bourns Model SRP0xxx series has a metal alloy powder core and flat wire construction that provides a range of benefits including low copper loss, DC resistance, and audible […]
Power inductors target high-current-density high-temp apps
Bourns, Inc. announced the addition of nine new series to its SRP series power inductor line. These new Model SRP inductor families are designed to meet high current and low radiation requirements in a small form factor. Bourns’ latest inductors feature a coil that is wound with either round or flat wire completely press-molded with an iron-based […]
Power transformers feature high clearance/creepage distance isolation
Bourns, Inc. introduced its new high clearance/creepage distance isolation power transformer series. Bourns Model HCT series high-voltage isolation push-pull transformers are AEC-Q200 compliant. Bourns designed its latest transformer series to support isolated interface power for CAN, RS-485, RS-422, RS-232, SPI, I2C, and lower-power LAN. Solutions that simplify isolated interface power are required in a broad range of […]
TVS diodes handle 600-W peak pulse power for high-density power supply apps
Bourns, Inc. announced the further expansion of its industry-leading line of discrete transient voltage suppressor (TVS) diode products with two new series of ESD/EFT surge protection products. Bourns designed its Model SMA6J and Model SMA6L-Q TVS diodes to protect power buses and I/O interfaces in data lines and DC power supplies. In addition, Bourns Model SMA6J-Q is AEC-Q101 compliant and well-suited for a […]
Pressure sensor designed for extended temperature applications
Bourns, Inc. further expanded its line of environmental sensors to include a new pressure sensor. Bourns Model BPS140 pressure sensors are based on state-of-the-art Microelectromechanical Systems (MEMS) technology, which provides extremely accurate condition readings in a miniature package size. Designed to deliver high sensitivity/accuracy and long-term reliability, the new BPS140 pressure sensors offer extended temperature capability and certain […]
TVS diodes target data center surge protection apps
Bourns, Inc. introduced two new TVS diode surge protection series designed to meet the component miniaturization required in today’s highly integrated and high power density designs. Bourns Model SMF4L and Model SMF4L-Q Series are offered in a compact, low profile surface mount SOD-123FL package with a height of just 1.125 mm, which is 50 percent smaller than Bourns’ previous […]
