EPC announces the availability of the EPC9145, a 1 kW, 3-phase BLDC motor drive inverter using the EPC2206 eGaN FET. The EPC9145 demonstration board is a 3-phase BLDC motor drive inverter board featuring the 2.2 mΩ maximum RDS(on), 80 V maximum device voltage EPC2206 eGaN FET. This board is tailored to e-bikes, eMotion, drones, and […]
EPC
Bidirectional 48-12-V two-phase converter demo board targets mild-hybrid vehicle apps
EPC announces the availability of the EPC9163, a 2 kW, two-phase 48 V – 12 V bidirectional converter that operates with 96.5 % efficiency in a very small footprint. The design of this demonstration board is scalable; that is, two converters can be paralleled to achieve 4 kW or three converters can be paralleled to […]
Reverse-boost converter. excels in high-efficiency light-load apps
EPC announces the availability of the EPC9162, a bi-directional buck or reverse-boost converter. This demonstration board features the 100 V EPC2052 for the synchronous converter and the EPC2038 in the synchronous bootstrap FET circuit. The EPC9162 is by default programmed as a boost converter operating at 12 V input to 60 V/50 W output. However, […]
Tiny eGaN FETs target BLDC motor drives, Lidar apps
EPC advances the performance capability while lowering the cost for off-the-shelf gallium nitride transistors with the introduction of EPC2065 and EPC2054. The EPC2065 is an 80 V, 3.6 mΩ, 221 Apulsed eGaN FET in a 7.1 mm2 chip-scale package. The small size and superior efficiency reduce overall power system size and weight and make it […]
GaN transistors, ICs feature radiation hardening
EPC announces the introduction of a new family of radiation-hardened gallium nitride transistors and integrated circuits. With higher breakdown strength, faster-switching speed, higher thermal conductivity, and lower on-resistance, power devices based on GaN significantly outperform silicon-based devices. The lower resistance and gate charge enable faster power supply switching frequencies resulting in higher power densities, higher […]
Compact dc/dc converters provide up to 12 kW/600 A for off-road apps
With its new VALUE DC-DC product line, BrightLoop Converters is aiming to democratize access to performance and offer a range of converters dedicated to off-highway and commercial vehicles. The French player in power electronics is teaming up with Efficient Power Conversion (EPC) to deliver the upcoming VALUE product line. BrightLoop Converters has gained experience from […]
48-to-12-V LLC converter handles 1 kW
EPC announces the availability of the EPC9149, a 1 kW-capable 48 V input to 12 V output LLC converter that operates as a DC transformer with a conversion ratio of 4:1. This demonstration board features the 100V EPC2218 and 40 V EPC2024 GaN FETs. The board is the size of DOSA-standard ⅛th brick format, measuring […]
GaN 1.5-kW 48/12-V bidirectional converter boasts 97% efficiency
EPC announces the availability of the EPC9137, a 1.5 kW, two-phase 48 V – 12 V bidirectional converter that operates with 97 % efficiency in a very small footprint. The design of this demonstration board is scalable; that is, two converters can be paralleled to achieve 3 kW or three converters can be paralleled to […]
Demo board powers 400-W BLDC motors with GaN
EPC announces the availability of the EPC9146, a 400 W motor drive demonstration. The EPC9146 power board contains three independently controlled half-bridge circuits, featuring the EPC2152 monolithic ePower Stage with integrated gate driver, 80 V maximum device voltage, 15 A (10 ARMS) maximum output current. The inverter board measures just 81 mm x 75 mm […]
Lidar laser IC includes 40-V, 10-A FET, integrated gate driver, LVDS logic-level input
EPC announces the introduction of a laser driver that integrates a 40 V,10 A FET with a gate driver and low-voltage differential signaling (LVDS) logic level input in a single chip for time-of-flight lidar systems used in robotics, drones, augmented reality, and gaming applications. The EPC21603 is a laser driver that is controlled using LVDS […]
