Manufacturers of instrumentation are striving to satisfy the demands of modern electronics which continuously require greater bandwidth. There has been a growing tendancy to incorporate waveguides, ranging from extremely small units soldered into printed circuits, to larger devices mounted in enclosures. The natural question that arises is how waveguides differ from ordinary wiring, and why […]
Flexible waveguide models deliver VSWR as low as 1.05:1
Fairview Microwave Inc., a leading provider of on-demand RF and microwave components, has unveiled a new line of seamless and twistable flexible waveguides covering 10 frequency bands from WR-137 to WR-22 and operating in the 5.85 GHz to 50 GHz range. Typical applications include base stations, DAS systems, antennas and test instrumentation. Fairview Microwave’s new line of […]
Integrated, short-open-load-through (SOLT) cable/antenna calibration kits have 26.5-GHz calibration capability
Fairview Microwave Inc., a provider of on-demand RF and microwave components, has launched a new line of 4-in-1 3.5mm calibration kits for cable verification, antenna measurement and other field test and measurement applications. Fairview Microwave’s new line of integrated, short-open-load-through (SOLT) calibration kits is made-up of two models that have a 26.5 GHz calibration capability. They feature a compact, […]
RF power amp accessories include heat sinks and power control cables
Fairview Microwave Inc. has introduced a new family of RF and microwave power amplifier accessories that includes heat sinks, heat sinks with cooling fans and power control cable assemblies. The heat sinks in this line are ideal for thermal management of power amplifiers that can generate excessive levels of heat. These heat sinks are able to enhance […]
RF coax probes/positioners work with test fixtures, ICs, substrates
Fairview Microwave Inc., a leading provider of on-demand RF and microwave components, has introduced a new, exclusive line of RF coax probes/positioners. These new products are ideal for use with chip evaluations, signal integrity measurements, coplanar waveguide, substrate characterization, gigabit SERDES and test fixture applications. This new product line from Fairview is made-up of four, […]
Electromechanical switches cover DC to 40 GHz
Fairview Microwave Inc., a supplier of on-demand RF and microwave components, has unveiled a new series of low insertion loss repeatability electromechanical switches. These electromechanical switches exhibit low insertion loss repeatability which is guaranteed over millions of switching cycles. This performance is extremely useful to help maintain overall system measurement accuracy. Typical applications for these switches […]
Low-pass, bandpass SMA coaxial filters target GPS, ISM, RFID and Wi-Fi bands
Fairview Microwave Inc. has introduced a new series of low pass and bandpass filters for use with multiple popular frequency bands. Fairview’s 13 new SMA coaxial filters consist of seven bandpass filters and six low pass filters. The bandpass filters were developed for use in various applications including GPS, ISM, RFID and Wi-Fi systems and operate in […]
Stable phase-lock oscillators operate from 500 MHz to 6 GHz
Fairview Microwave Inc., a supplier of on-demand microwave and RF components, has launched a new line of phase locked oscillators (PLO) that are accurate and stable frequency sources and a key component for almost any communications, navigation, surveillance or test and measurement system. These PLOs offer accurate and stable output frequencies with low phase noise […]
Fairview Microwave releases BMA connectors and adapters with VSWR as low as 1.15:1
Fairview Microwave Inc. has launched a new product line made-up of 45 BMA connectors with VSWR as low as 1.2:1, and seven BMA adapters with VSWR as low as 1.15:1. Typical applications include blind mating, RF backplanes, rack and panel connectivity, high-speed switching and use in phased array systems. Fairview’s new line of 54 BMA […]
Low-PIM 4.3-10 connectors and adapters deliver VSWR as low as 1.08:1
Fairview Microwave Inc., a supplier of on-demand microwave and RF components, has released 18 new 4.3-10 connectors and adapters with low-PIM performance of -166 dBc typical and a maximum operating frequency of 6 GHz. Typical applications include wireless base stations, small cells, custom cable assemblies, antenna feeder cables, mobile communications systems and distributed antenna systems […]
The post Fairview Microwave launches low-PIM 4.3-10 connectors and adapters appeared first on Connector Tips.
@eeworldonline
EE World Online
@eeworldonline