The new AresONE-S 400GE test system enables network equipment manufacturers and data center operators to validate complex, mixed 400 gigabit Ethernet (GE) and lower-speed networks and devices. Data center operators have widely deployed mature 100GE non-return-to-zero (NRZ)-based technologies. However, higher Ethernet speeds, such as 400GE, create new mixed signaling and forward error correction (FEC) implementations […]
keysight
Reference design based on 4-kW high-efficiency single-phase ac-dc evaluation board
A new power supply reference design enables engineers to identify and correct design errors before building hardware, thereby lowering product costs and speeding time to market. Switched-mode power supplies provide greater efficiency, increased power density and lower overall system costs when using GaN devices. However, GaN, a high switching speed, high performance wide bandgap semiconductor, […]
Basics of QAM reception and its measurement
A conventional AM broadcast generally begins in the studio as a music or voice audio signal. The audio signal modulates the amplitude of a radio-frequency electrical signal. This AM signal–also referred to as double-sideband amplitude modulation to distinguish it from single-sideband modulation–produces equal frequency sidebands on either side of the center frequency. In single-sideband modulation […]
The back and forth of interferometer technology
Conceptually, the interferometer is a relatively simple instrument that compares two distances typically differing only by a slight amount. Two waves, often coherent light waves, reflect from standard mirrors mounted at the object under investigation. The light from one mirror passes through a half-silvered mirror while the light from the other reflects from the back […]
The complexity of wireless receiver testing
Eric Hsu | Keysight Technologies, Inc. The demand for wireless communications now challenges the physical limitations of today’s wireless communications systems. Interference can easily arise when systems operate in a crowded wireless environment using a shared spectrum. Signal congestion makes the process of designing, testing, and isolating system problems more complex. In the next few […]
Microwave Symposium goes virtual, timeframe August
The 2020 IEEE International Microwave Symposium will be a virtual event in August.
The basics of 5G’s modulation, OFDM
Orthogonal frequency-division multiplexing has become the standard modulation format for 5G New Radio. Lean how OFDM works and how it’s used. Orthogonal Frequency Division Multiplexing (OFDM) is an efficient modulation format used in modern wireless communication systems including 5G. OFDM combines the benefits of Quadrature Amplitude Modulation (QAM) and Frequency Division Multiplexing (FDM) to produce…
How to test USB4 designs
Designers must look at and characterize the entire Type-C ecosystem when testing USB4 designs. Jit Lim • Keysight Technologies The USB Type-C connector has received significant adoption with ubiquitous standards like USB, DP, and Thunderbolt. The next-generation variant of USB is USB4. USB4 will transmit and receive on all four lanes of the Type-C connector […]
A simplified way of devising 5G phased arrays
We recently got a tour of Qorvo‘s new RF front-end module from Qorvo’as Bror Peterson and Keysight’s Osamu Kusanois. The module is said to be the world’s first 39-GHz front-end that integrates a power amp, low-noise amp, and switch in one small package. The module uses gallium nitride technology to get a high power density. […]
Using the scope integration function to determine energy use
Integrals come in handy in measuring power consumption when that consumption is intermittent or corresponds to a dissipation vs. time function that is irregularly shaped. The classic example is that of a controller that wakes up every second or so. You can, of course, use single-shot capture to get the current waveform when the controller […]