Maxim Integrated Products, Inc. has accelerated the production of its medical technologies to address increased customer need during the COVID-19 pandemic. The company’s semiconductor devices are used in medical equipment such as virus detection devices, ultrasounds, analytical/laboratory equipment, ventilators, patient remote monitoring devices, intravenous blood monitors, temperature loggers for critical COVID drugs, pulse oximeters, remote […]
Blood oxygen meters, Part 2: IC implementations
It is now trivial and non-invasive to measure blood-oxygen saturation SpO2, thanks to LEDs, algorithms, and ICs for pulse oximetry — it’s a very long way from having to draw blood and send it out for assessment. Part 1 of this FAQ discussed the principle of the non-invasive, light-based pulse-oximetry systems for reading blood-oxygen saturation […]
Isolated RS-485 module simplifies Fieldbus designs
Bringing intelligence to the edge of typically noisy industrial environments calls for the high efficiency and robustness delivered by the new MAXM22511 2.5kV isolated RS-485/RS-422 module transceiver with power from Maxim Integrated Products, Inc. The MAXM22511 dramatically simplifies and shrinks the design of Fieldbus communications systems for factory automation, motor control and other industrial internet of things […]
Analog Top Talks in October on EDABoard.com forums
Peer-to-peer, engineer-to-engineer questions and answers from the EDABoard.com engineering community around analog ICs and analog design. Click the “Read more” link and follow the entire conversation and maybe add your two cents by logging in to EDAboard.com. Scheme for multiple solid state relays controlled by MCU – I need to control multiple AC mains power terminals […]
Quartz crystals and oscillators, Part 2: Advanced crystals
Part 1 of this FAQ established the context for the quartz crystal as the core of an oscillator whether used as a system clock or as a frequency-setting element in a tuning circuit. This part looks at the achievable performance, the factors that affect it, and what can be done for highest performance. Q: What […]
Quartz crystals and oscillators, Part 1: Crystal basics
An oscillator or clock function is key to nearly all electronic circuits, and in most (but not all) cases, the heart of this oscillator circuit is a tiny piece of quartz, called the crystal blank or slab. It’s easy and commonplace to think of the crystal as a simple component, but as with most components, […]
GPS, Part 2: Implementation
Part 1 of this FAQ looked at the basic principles of the GPS system. Part 2 looks at some hardware circuitry used to implement a GPS receiver as well as the unappreciated role that Einstein’s Theory of Special Relativity plays in providing an accurate GPS. Q What are the key elements of a GPS receiver? […]
20 mA current loops, Part 2: Advanced features
Part 1 of this FAQ looked at the basics of the 20-mA current loop, why it is still used extensively, and its primary attributes. In this part, we’ll look at how the analog current loop is used for digitized signals and at self-powered loops – two developments which have extended its life and viability. Q: […]
20-mA current loops, Part 1: Basic functions
You’ve been given an “easy” assignment: get the low-rate data from a temperature sensor to a control computer located 100 feet (30 m) away, in an industrial setting. After much investigation and assessment, you choose a widely used standard called the 20-mA loop, which has been in use for over 50 years, rather than Wi-Fi, […]
Active noise cancellation, Part 2: Implementation
Part 1 of this FAQ looked at the basic concept of active noise cancellation, how it might be implemented in principle using analog circuitry, and the harsh reality of actually providing the ANC function. Part 2 looks at modern ANC systems and how they function, as well as their practical issues. Q: Is ANC using […]
