Murata further expands its OKD series of Digital PoL DC-DC converters by launching the 90A/162W OKDx-T/90 series from Murata Power Solutions. This is the highest current-rated product in the OKD series, which already provides solutions from 6A to 60A. The OKDx-T/90 series is ideally suited for FPGA & processor applications. The module is specified to […]
murata
Ultra-Thin Supercaps deliver 35 mF in a 20 x 20 x 0.4-mm package
Murata Americas today introduced its DMH series, a new lineup of supercapacitors with a thickness of 0.4mm, a μF order capacitance, low ESR, and the capability to output instantaneous power. The product line delivers a solution to devices with limited space that are challenged by power consumption issues since its slim package can be mounted in underutilized space. Further, the DMH can […]
Choosing a temperature-measurement sensing method
Temperature is a parameter that often needs measuring. It may be within an enclosure, on a PCB, remotely or even “wirelessly”. Wireless, in this case, does not necessarily mean a remote sensor communicating using radio frequencies, it can mean a pyroelectric sensor. Pyroelectric sensors are very long wavelength detectors which measure radiation in the 6-15μm […]
Bluetooth module includes antenna connections, SPI, Xtal for consumer/medical apps
Murata Americas today announced the release of its Nordic-based BLE module. The latest WSM device consists of Nordic Semiconductor’s nRF52832 IC, a 32 MHz crystal for timing, and an on-board antenna. Additionally, it contains two pins for an off-board omni-directional antenna and a NFC antenna. The module provides a Serial Port Interface (SPI) and UART interface to Nordic’s nRF52832 M4 Cortex processor. The WSM-BL241-ADA-008 module provides BLE connectivity between […]
The post Bluetooth module includes antenna connections, SPI, Xtal for consumer/medical apps appeared first on Microcontroller Tips.
Crystal units allow for higher-density mounting and use in low profile, IoT devices
Murata Americas today introduced several miniaturized, highly advanced crystal units developed specifically for the IoT market. The company used its proprietary technology and volume production capability to design a product line that excels in quality and reliability, while also providing a cost effective solution. The series features a compact package that allows for higher-density mounting and use in lower profile devices. Target applications include IoT, mobile […]
The post Crystal units allow for higher-density mounting and use in low profile, IoT devices appeared first on Analog IC Tips.
Digitally controlled PoL operates in 4.5V to 14Vdc range in FPGA and processor applications
Murata introduces the OKDL-T/60-W12, a 60 Amp, 94.9% efficient addition to the Murata Power Solutions OKD family of digitally controlled point of load (PoL) DC-DC converters. The OKDL-T/60-W12 power module is ideally suited for FPGA and processor applications. The module is specified to operate over a Vin range of 4.5V to 14Vdc, and provides a […]
PMBus DC-DC converter in eighth-brick package puts out 300 W
Murata has announced the Murata Power Solutions DBE series of 300 Watt fully regulated digitally controlled DC-DC converters packaged in an industry standard eighth-brick format. The footprint conforms…