Novotechnik introduces the TFD Series of touchless linear position sensors that provide wear-free operation in tight spaces. Maximum sensor dimensions are 40 x 27 x 7 mm thin. The sensing direction can be either parallel or perpendicular to mounting holes. The TFD-4000 Series utilizes a magnetic position marker to provide a touchless measurement range of […]
Novotechnik U.S.
Touchless angle sensorssport IO-Link output interface
Novotechnik U.S. introduces the RFC4800 Series of touchless angle sensors measuring angular position up to 360°, revolution counter, and speed—without wear. The RFC 4800 is now available with an IO-Link output interface. Its serial communication protocol needs only three wires to transmit measured values and status information simultaneously. The status bit can signal a controller […]
Rod position sensors carry stainless steel shields
Novotechnik, U.S. introduces the LWX-002 Series shaft protected position sensors designed for extremely harsh environments. The all-metal sensor shaft is protected over its range of motion with an SS304 alloy, 0.9 mm thick stainless steel shield. The LWX-002 Series has a differential pressure compensation system with a Gore membrane to compensate for the pump effect […]
Customizable angle sensors with CANBus option
Novotechnik, U.S. introduces the Vert-X 2800 Series of sensors that measure angular position. These sensors convert rotational angle into an analog or digital output. Digital interface options include J1939 CANBus as well as SPI and PWM. The J1939 CAN bus option enables peer-to-peer or broadcast signaling and is a standard often found in commercial vehicle […]
