The specification process for resistors involves more than just allowing for tolerance bands. Voltage, power, and temperature ratings can interact in ways that can degrade circuit reliability. Kory Schroeder, Stackpole Electronics, Inc. Although not a complex component, resistors have specifications that can be confusing, misleading, and misinterpreted. When specifying performance qualities, it is important to […]
stackpole
Thin-film chip resistors target high-precision apps
The widely used RNCF Series from Stackpole is a thin-film chip resistor series capable of outstanding precision. From sizes 0201 up to 2512 the RNCF offers 0.01% tolerances for a wide range of resistance values. The RNCF also offers TCR down to 2 ppm for a significant value range for all sizes but the 0201 […]
Surface mount chip jumper offers higher current ratings
Stackpole’s HCJ Series, a surface mount chip jumper, offers current ratings ranging from 14.2 amps for the 0402 up to 63.2A for the HCJ2512. In comparison, the rated current for a standard 2512 thick film jumper is 3A. The HCJ0402 has a maximum resistance of 3 milliohms while the other sizes have a maximum resistance […]
SMD versions of 5mm and 7mm disk varistors handle up to 30J
The PV Series from Stackpole offers two chip sizes, 3225 and 4032. These two sizes correspond to the equivalent 5mm and 7mm disk MOV’s offering protection for circuits with working voltages ranging from 11 Vrms to 300 Vrms. The PV Series varistors are UL recognized with the capability to handle up to 30J of energy […]
Resistors offer high voltage pulse handling up to 7KV
Stackpole’s RNV resistors meets IEC 60065.14.1 standards handling up to 7KV for 50 discharges of a 1nF capacitor. The RNV Series has a working voltage rating up to 1600 VDC and an overload voltage rating of up to 3200 VDC depending on resistance value. The RNV series uses proprietary manufacturing processes and materials to provide a […]
Radial leaded MOVs for general purpose overvoltage protection
Stackpole’s RV Series of radial leaded metal oxide varistors is available in a wide range of disk sizes and working voltages designed for general purpose overvoltage protection. The RV Series is UL1449 certified and offers disk sizes from 5mm up to 20mm with peak current ratings up to 18,000 amps and energy handling up to […]
High current four terminal shunts increase sensing efficiency
The HCSK Series from Stackpole is a surface mount metal element high current shunt with four terminals. Four terminal Kelvin sense resistors provide the most accurate sensing as it removes the effect of lead resistance in the sensing function. The HCSK2725 rated at 5W at an ambient temperature of 100C utilizes unique materials and a […]
HVC precision high voltage chip resistors
The HVC series from Stackpole is a thick film surface mount chip resistor series designed for high voltage handling and high resistance values. The HVC has low VCR, TCR available down to 25 ppm, and tolerances as low as 0.1%. Voltage ratings for the HVC are as follows: * HVC0603 rated at 400V * HVC0805 […]
HDM Series economical axial leaded resistors offer anti-moisture performance and 1% tolerance
The HDM Series from Stackpole is an axial leaded carbon film technology resistor with outstanding moisture withstanding capability. Axial leaded resistors that need to withstand high humidity typically require a metal glaze technology which is considerably more expensive. The HDM Series can survive 100 hours in a pressure cooker at 120 degrees C, over 98% […]
New HVAM series high voltage axial leaded resistors
Stackpole announces the release of the HVAM Series, an axial leaded series of precision resistors designed for high voltage handling and high resistance values. The HVAM offers resistance values from 500K ohms to 10G ohms depending on size and tolerance. The proprietary fine film of the HVAM enables tolerances down to 0.1% and TCR as […]