TDK Corporation announces the introduction of TDK-Lambda’s CUT35 low profile, triple output power supplies. Packaged in the industry standard 2” x 4” footprint, the CUT35 requires no minimum load, simplifying installation. The easy to use power supplies are designed for medical, industrial, broadcast and test & measurement applications. Operating from a universal input voltage of […]
TDK Corporation presents the new ADL3225V choke for automotive power over coax (PoC) applications. The wire wound inductor, which has a DC resistance of 0.9 Ω, features high impedance over a broad frequency spectrum of 1 MHz up to 1 GHz. The new type offers good DC superimposition characteristics, thus separating the power from the […]
TDK Corporation presents the world’s first multilayer chip beads and inductors with the innovative soft-termination technology that is already proven in TDK MLCCs. The external electrodes of the new KMZ1608 and KPZ1608 series of chip beads and the KLZ1608 and KLZ2012 series of inductors feature a conductive resin layer that offers effective protection against board […]
The post Chip beads and inductors carry robust soft terminations appeared first on Analog IC Tips.
TDK Corporation presents the fully revised data book for EPCOS aluminum electrolytic capacitors with screw terminal, snap-in, axial and single-ended designs. In addition to proven products the book also contains many innovations, including the B43742* and B43762* screw terminal series, which feature an extremely compact design. The B43743* und B43763* series, on the other hand, […]
TDK has expanded its portfolio of haptic components with the new ultra-thin PiezoHapt™ actuator featuring a very short response time of just 4 ms. PiezoHapt has a unimorph design consisting of a multilayer piezo element bonded to one side of a vibration plate. With a thickness of a mere 0.35 mm the new haptic actuator […]
TDK Corporation has expanded its CGA series of automotive-grade MLCCs for high-temperature applications: New MLCCs with X8L temperature characteristics have been introduced and the capacitance range of its existing X8R types has been extended. With the new types, TDK’s lineup of X8L and X8R MLCCs features an unrivalled high capacitance range of up to 22 […]
The post Multi-layer chip capacitors target high-temp vehicle apps appeared first on Analog IC Tips.
TDK Corporation presents the new TFM160808ALC thin-film inductor for power supply circuits, which features a maximum DC resistance of 62 mΩ that is 30 percent lower than for existing types (e.g. TFM160808ALM, 0.47 μH). The new type, whose compact dimensions are just 1.6 mm x 0.8 mm x 0.8 mm, also offers a high rated […]
TDK Corporation has extended its portfolio of EPCOS ERU SMT power inductors with the ERU16 choke series that comprises ten different types. The inductance values of the new B82559*A016 series extend from 1.0 µH to 30 µH and their saturation currents range from 9.2 A DC to 37 A DC. The outstanding feature of these […]
Automotive-grade soft-termination and MEGACAP Type MLCCs combine the low relative permittivity of the C0G dielectric with rated capacitance values up to 300 nF and enable MLCCs to be used where reliability is required. Their rated voltages range from 50 V to 3 kV. Developed by TDK Corp., the new MLCCs feature high capacitance stability at […]
TDK Corporation presents a new series of EPCOS z-axis transponder coils for passive entry, passive start (PEPS) car access systems. With their dimensions of just 7.7 mm x 7.4 mm…
The post Z-axis transponder coils work with passive entry, passive start car access systems appeared first on Analog IC Tips.