The TDK-Lambda brand DRB480-48-1 AC-DC DIN Rail mount power supply has an efficiency of up to 93%, reducing waste heat and allowing the use of a compact enclosure size featuring a power density of 6 W/in3. The power supply is suitable for a wide range of industrial applications including factory automation, process control and test […]
TDKLambdaAmericas
Full-Rack 1U ac/dc programmable supplies extended with 1.7-kW models
The TDK-Lambda 1U Full-Rack 1.7-kW ac/dc Programmable Power Supply Series provides a choice of ten different models ranging from 10 V-170 A to 600 V-2.8 A well suited for design, test and measurement in the laboratory/R&D environment and address broad market segments including automotive, aerospace, semiconductor, industrial and renewable/alternative energy. Built into a lightweight 1U […]
When you don’t fuse the neutral wire
By the Power Guy, TDK-Lambda AC-DC power supplies for the medical market have long been not only safety certified to the IEC 60601-1 medical standard, but also to the industrial IEC 60950-1/IEC 62368-1 standards. Dual certification reduces the number of individual model numbers that must be produced and stocked; this practice improves production efficiency and […]
DIN-rail 960-W supply provides 1,440 W of peak power
A 960-W-rated model to the DRF series ac-dc DIN rail mount power supplies is 95% efficient and produces little internal waste heat, enabling electrolytic capacitors to run cool, providing a calculated life of in excess of eleven years with a 75% load at 230-Vac input. The unit can supply a peak load of 1,440 W […]
Class II, Level VI external 110-W-rated supplies carry home medical and ITE safety certifications
The TDK-Lambda medical and industrial certified DTM110-C8 Class II (no earth ground needed) external power supplies meet stringent DoE Level VI and EU Tier 2 v5 standards for efficiency and off-load power. The DTM110-C8 is certified to the medical IEC 60601-1 and industrial IEC 60950-1 standards, making it suitable for a variety of hospital and […]
1 kW and 1.5 kW supplies include optional 5-V standby outputs
An isolated 5-V, 1-A standby voltage option is now available for the RWS1000B and RWS1500B industrial ac-dc power supplies. Applications include industrial, test & measurement, broadcast, communications and LED signage equipment. Rated at 1,000 W and 1,500 W the additions are available with 12, 15, 24, 36 and 48-V main outputs and can accept an […]
Low acoustic noise 1,500-W medical & ITE power supplies meet Class B conducted & radiated EMI
The TDK-Lambda 1,500-W rated CUS1500M series of ac-dc power supplies extend the CUS-M family of products to now cover 30 to 1,500 W. The CUS1500M has both medical and ITE (Information Technology Equipment) certifications and is well suited for industrial, medical, cosmetic laser treatment and analysis equipment requiring less than 300 µA earth leakage current, […]
Single-output 600-to-1,200-W supplies provide MoPPs isolation, low acoustic noise, PMBus communication
The QS series of single output medical and industrial power supplies have full MoPPs (Means of Patient Protection) isolation, low acoustic noise and a range of options including a PMBus communication with a high current standby voltage. With medical and industrial safety certifications, the power supplies are suitable for use in medical, test and measurement, […]
Compact 6 to 30-A, 250-V EMC filters are easy to install
The TDK-Lambda RSEV series of EMC filters, with a voltage of 250 Vac/Vdc and a choice of 6, 10, 16, 20 and 30-A current ratings, has an integrated touch-resistant terminal block with recessed, captive screws. Hardware cannot be misplaced or dropped inside the system enclosure. The filters are suitable for general purpose use in a […]
Conduction/convection cooled supplies only 31-mm high handle 206-W peak loading
The TDK-Lambda CUS200LD ac-dc power supply, rated at 120 W convection or 150 W conduction cooled, can deliver up to 206 W for up to 10 seconds to drive peak loads associated with dynamic LED displays. The product’s 31-mm height allows the product to be mounted inside low profile signage, or industrial equipment with limited […]
