The WaveRunner 8000HD High Definition Oscilloscopes (HDO) are the world’s only 8-channel, 12-bit resolution, 2-GHz instruments. WaveRunner 8000HD leverages LeCroy’s HD4096 High Definition technology and a 15.6-in. touchscreen, high channel counts, and 5 Gigapoints of acquisition memory in critical applications such as high-power/three-phase power conversion, automotive electronics, power integrity and power sequencing, and embedded control […]
teledynelecroy
Toolkit, breakout test fixture help debug automotive Ethernet problems
A new Automotive Ethernet Debug Toolkit + Automotive Ethernet Breakout Test Fixture provides a dedicated debug environment for debugging signal quality communication issues. The setup separates bidirectional traffic and characterizes system performance with 12 eye diagram measurements. The unique and dedicated Automotive Ethernet Debug Toolkit is designed to detect signal quality communication issues between a […]
Rogowski Coil current probes make ac or fast-pulse current measurements
Teledyne Test Tools T3RC Rogowski Current Probes offer broad current measurement ranges and a wide frequency span. Five models are available, providing measurement capabilities up to 6,000 A and with the capability to connect around the leg of a small T0-220 device. The probes connect to any standard oscilloscope via a conventional BNC connection. The […]
What’s new in USB Power Delivery 3.0
A new version of the USB spec puts additional demands on testing regimes that wring out power-handling options. David Maliniak | Teledyne LeCroy Since its official debut in 1996, the Universal Serial Bus (USB) protocol has seen numerous revisions spanning three generations of the standard, with USB 4.0 waiting in the wings for later in […]
Fast interconnect analyzer reveals time- and frequency-domain details in a single acquisition
The WavePulser 40iX high-speed interconnect analyzer allows high-speed hardware designers and test engineers to characterize and analyze interconnects and cables for high-speed serial protocols such as PCI Express, HDMI, USB, SAS, SATA, Fibre Channel, InfiniBand, Gigabit Ethernet, and Automotive Ethernet. Until now, interconnect testing and validation has been bifurcated between time- and frequency-domain testing. For […]
PCIe 4.0 U.2/U.3, M.2 interposers facilitate SSD protocol analysis
The U.2/U.3 and M.2 interposer cards help analyze both standard single-port and dual-port solid-state drives (SSDs) that support the PCI Express (PCIe) 4.0 specification. When used with the Summit Protocol Analyzer, the U.2/U.3 and M.2 Interposer Cards enable the capture and analysis of all PCIe bus traffic between a host backplane and a single- or […]
Protocol analyzer platform wrings out next-generation USB4
Teledyne LeCroy has developed the first protocol analyzer platform for testing next-generation USB4 and Thunderbolt 3 systems. The convergence of the underlying Thunderbolt and USB protocols in the USB4 specification will increase compatibility among USB Type-C connector-based products, simplifying how people connect their devices. Teledyne LeCroy’s new Voyager M4x Protocol Analyzer will enable companies to […]
Software runs USB 3.2 transmitter and receiver compliance tests
A new automated compliance test package handles USB 3.2 transmitter and receiver compliance testing to the QPHY-USB3.2-Tx-RX spec. USB 3.2 is the latest iteration of the USB spec, allowing multi-lane operation: either two lanes at 5 or 10 Gb/sec, enabling a maximum transfer rate of 20 Gb/sec (Gen2x2). To that end, Teledyne LeCroy developed the […]
High-def scopes handle three-phase power analysis
A three-phase power analysis software package brings single-phase and three-phase static and dynamic power analysis to the HDO8000A, HDO6000A and WavePro HD 12-bit High Definition oscilloscopes from Teledyne LeCroy. With the 3-Phase Power Analysis software package, research and development engineers can now use Teledyne LeCroy’s 12-bit-resolution oscilloscopes to better understand complex power conversion system and […]
T&M gear supports PCI Express 5.0 physical-layer testing
The new Teledyne LeCroy QPHY-PCIE5-TX-RX physical-layer software option for LabMaster 10Zi-A series oscilloscopes provides: Automated receiver-test calibration for jitter-tolerance testing at the full 32 GT/sec PCIe 5.0 rate. While existing solutions can take up to a full day to calibrate before even starting the test, the Teledyne LeCroy calibration will be completed in a fraction […]