Converters with built-in holdup circuitry reduce the size and requirements for input capacitors. Dr. André Buffing, L. Dinkelmann, Traco Power DC/DC converters are generally designed to maintain their output despite brief interruptions of their input power. The duration of this output hold-up often is set by the value of an external capacitor connected across the […]
tracopower
Low-cost 30-W dc-dc converter features 4:1 input range
30-W dc-dc converters in the new THL 30WI series come in a standard 1×1-in footprint. This next-generation product greatly improves the “cost/performance” ratio in the 30-W, 1×1-in industry standard product area. Combined with safety approvals to the latest IEC/EN/UL 62368-1 standards, the product is a candidate for mobile equipment, instrumentation, distributed power architectures and industrial […]
15-W high-density dc-dc converters come in DIP-16 footprint
TRACO POWER announces the release of four new families of 15-watt high-density DC-DC converters in the DIP-16 footprint. These 4 families allow choices for 2:1 or 4:1 input ranges with or without an integral heatsink-case design. These four families are: TEL 15N (2:1 Input range); TEL 15N-HS (2:1 input with heatsink); TEL 15WIN (4:1 input); […]
Compact unregulated 3-W dc/dc converters target industrial applications
The TMU 3 series consists of a set of isolated 3-W dc/dc converters with unregulated outputs in a standard SIP-4 package. They are designed to offer a compact low-cost alternative to regulated series with no concession on quality and lifetime. They feature a continuous short circuit protection circuit, I/O-isolation of 1,500 Vdc and an operating […]
DC/DC W converters come in compact SIP-9 package
TRACO POWER announces their new TRV 2M series of 2 Watt DC/DC in the compact SIP-9 package with reinforced isolation of 5000 VAC for medical and industrial applications. This series is designed to protect any connected interfaces or applied parts to patients with 2XMOPP compliance. The TMR 2M consists of 21 models offering 1.5:1 input […]
High-density 12-W dc-dc converters in SIP-8 Package boast 4:1 input range
TRACO POWER announces their new TMR 12WI series of 12 Watt DC/DC converters featuring the highest power density of 4.73W/cm³ in a standard SIP-8 package (12 watts in a 0.87” x 0.32” footprint). The TMR 12WI consists of 24 Models offering 4:1 input ranges of 4.5~18 / 9~36 / 18~75 VDC and output voltages of […]
50-W ac/dc supplies feature minimal footprint
TRACO POWER announces their new TPI 50-AJ series of 50W high-density AC/DC power supplies available in 3.00 x 1.50 x 1.20” open frame packages for a wide range of industrial & ITE applications where reliability is critical and space is limited. Features include: 50 watt open frame measuring only 3.00″ x 1.50 x 1.20″; Compact […]
300-W ac/dc supplies handle industrial, automation, ITE apps
TRACO POWER announces their new TPI 300 series of 300W high-density AC/DC power supplies available in two packages, a conduction-cooled baseplate or fully enclosed with a fan. Designed for a wide range of OEM / Embedded and Industrial applications where long-term reliability is critical and space is limited. Features include: TPI 300L-M open-frame / baseplate […]
Compact ac/dc supplies provide 300 W for industrial/medical uses
TRACO POWER announces their new TPP 300 series of 300W high-density AC/DC power supplies available in open frame or fan-enclosed packages for a wide range of Medical and Industrial applications where long-term reliability is critical and space is limited. Features include: TPP 300A-M open-frame models (2.00 x 4.00 x 1.26”); TPP 300-M enclosed with fan […]
AC/DC supplies put out 180 W at up to 53 V
TRACO POWER announces their new TPP 180 & TPI 180 series of 180W high efficiency, miniaturized AC/DC power supplies for both Medical and Industrial applications. These supplies measure only 2 x 3 x1.24” in the open frame version with global safety approvals for medical or industrial markets. Consisting of 16 standard models with single outputs […]