VadaTech has announced the VTX870, a VPX chassis with six 3U VPX slots (switch plus five payload slots) that can accept 0.8-inch, 0.85-inch and 1.0-inch pitch modules. RTMs are supported on all slots. The side panels on both the front and rear slots are removable to ease debugging, making the chassis ideal for development as well as commercial […]
Expansion Solution, Provides Flexible, Effective Method Of Incorporating MTCA.4 Acquisition, Control Hardware Into PC Processing Environment
VadaTech has announced the VT817 and VT819 chassis. The VT817 is a convenient low-cost MicroTCA.4 PCIe Gen3 Expansion solution, providing a flexible and effective method of incorporating MTCA.4 acquisition and control hardware into a PC processing environment. The shelf offers two AMC slots and an integrated MCH. The front panel ports accept PCIe Gen3 inputs from VadaTech’s […]
Double-Module In An AMC Form Factor Card
VadaTech announces the AMC584. The AMC584 is a double-module in an AMC form factor card with Xilinx Virtex UltraScale+™XCVU13P FPGA and two banks of 64-bit wide DDR4. The XCVU13P FPGA provides over 12,000 DSP slices and 3,780 thousand logic cells. The XCVU13P FPGA is routed to base and extended option regions (all the tongue one […]
FPGA Mezzanine Card Offers Small Footprint For I/O Expansion
VadaTech announces the FMC155. The FMC155 is an FPGA Mezzanine Card (FMC) per VITA 57.1 standard, offering a small footprint and allowing for general-purpose I/O expansion. The FMC155 provides sixteen LVDS input/outputs, eight RS-485/422 RX plus eight RS-485/422 TX, and sixteen single-ended +3.3 V input/outputs. LVDS signals go through a Cross Bar Switch (CBS), which […]
Cross Bar Switch Routes 20 Lanes From Backplane To Front
VadaTech announces the AMC241. The AMC241 is a 36×36 Cross Bar Switch (CBS) in the AMC form factor which allows any of the 20 lanes from the backplane to be routed to the front. Since the Cross Bar Switch is agnostic to the protocol, any protocol such as PCIe, SRIO, 40GbE, 10GbE, GbE, Aurora, etc. […]
High Speed ADC/DAC Module Family With Integrated FPGA
VadaTech has added four new products to the range of GSPS ADC and DAC modules with integrated FPGA, available in OpenVPX and AMC form factor. The AMC598 and VPX598 provide quad ADC (AD9208) with sample rates of up to 3 GSPS at 14-bits, and quad DAC (AD9162 or AD9164) at 16-bits with rates up to 12 […]
Video Encoder/Decoder Modules Provide Error Resilience Tools
VadaTech announces a full line of Video encoder/decoder AMCs, comprising the AMC347, AMC350, AMC351, and AMC352. The AMC347 performs H.264 encoding of RGsB Video input, providing the encoded data stream to a host over PCIe. The AMC347 also provides additional functionality of converting a Display Port input to RGsB, with the output over RS-343A capable […]
FPGA Mezzanine Card Features Programmable Internal Clock Frequency
VadaTech announces the FMC216 FPGA Mezzanine Card (FMC) per VITA 57. The FMC216 provides 12-bit ADC conversion at rate of up to 2.6 GSPS (ordering options available for 2.0 and 2.5 GSPS) and 14-bit DAC conversion at rates of up to 5.6 GSPS. The ADC section is based on AD9625 with 8 lanes of JESD204B […]
High speed 16 ADC At 3 GSPS Contains Synchronous Capture
VadaTech announced the VT988- a TI ADC08B3000-based 16-channel data acquisition platform capable of synchronous sampling 8-bit ADCs at up to 3 GSPS. All input data channels pass through a Virtex-7 485T FPGA which is user programmable for filtering/DDC. Data can be output through dual front-panel 10 GbE or processed by the on-board JetsonTX2 module, which is ideal for […]