All Sensors Corporation of Morgan Hill, California has announced the availability of additional DLV Series pressure ranges. The DLV Series now includes 30 and 60 psi (200 and 400 kPa) differential and 600 to 1100 mbar (60 to 110 kPa) barometric pressure ranges. This device series offers design engineers excellent performance over barometric and middle […]
SLDM Tunable LoopTM Non-Isolated DC-DC Converter
Bel Power Solutions announces the new SLDM Tunable LoopTM SLDM-06D1Ax and SLDM-12D1Ax modules, which are ultra-low profile, non-isolated DC-DC converters that deliver up to 6A and 12A with maximum flexibility of being mounted on the top side or bottom side of the host PCB. The SLDM modules fit into the smallest, tightest spaces (only 2.8mm […]
eGaN 30-V half-bridge module targets PoL apps
Efficient Power Conversion Corporation, the world’s leader in enhancement-mode gallium nitride on silicon (eGaN®) power FETs and ICs announces the EPC2111, 30 V enhancement-mode monolithic GaN transistor half bridge. By integrating two eGaN® power FETs into a single device, interconnect inductances and the interstitial space needed on the PCB are eliminated. This increases both efficiency […]
Tube-to-fin, liquid-to-air heat exchangers sport high fin density
Advanced Thermal Solutions, Inc. (ATS), a leading-edge thermal engineering and manufacturing company focused on the thermal management of electronics, is pleased to announce its new line of tube-to-fin, liquid-to-air heat exchangers, one of an array of liquid cooling products that ATS offers. ATS heat exchangers are made with the industry’s highest density fins to maximize […]
Synchronous step-down controller operates at up to 2.25 MHz
Analog Devices, Inc., which recently acquired Linear Technology Corporation, announces the LTC7800, a synchronous step-down DC/DC controller that operates at up to 2.25MHz for reduced circuit size and increased power density. Its low 45ns minimum on-time enables 24VIN to 3.3VOUT conversions while switching at a fixed 2MHz, avoiding critical noise-sensitive frequency bands including AM radio. […]
Tech center to handle cellular testing of connected cars
Teledyne LeCroy, Inc., the worldwide leader in Bluetooth® protocol analysis and testing services is pleased to announce the availability of cellular testing as an expansion of its connected car testing services at its Automotive Technology Center in Farmington Hills, MI. Automotive manufacturers and suppliers can now ensure that vehicles and systems provide flawless 4G LTE […]
The post Tech center to handle cellular testing of connected cars appeared first on Test & Measurement Tips.
Stackpole’s all metal current sense chip resistors offer high efficiency power management
Stackpole offers low value resistors constructed with metal foil technology. This precision design allows Stackpole to achieve tolerances down to 0.5%, TCR’s of 50 ppm TCR in resistance values down to 0.25 milliohms. These low resistance values are ideal for power management applications where high efficiency is a priority allowing design engineers to dissipate less […]
Resettable PTC devices range from 0.55A to 2A
Bel Circuit Protection, a Bel group company (NASDAQ: BELFA and BELFB) and global manufacturer of standard glass and ceramic cartridge fuses, announces the addition of five new ratings to the 0ZRE Series Fuse product offerings. The 0ZRE Series has expanded the Hold Current range from 0.55A to 2A. The 240 VAC/240 Vdc ratings remain the […]
Single- and quad-port integrate circuit modules (ICM) Tx/Rx 0 to 60 W
Bel Magnetic Solutions, a Bel group company (NASDAQ: BELFA and BELFB) and global leader of MagJack® Integrated Connector Modules (ICM) for Networking and Telecommunications applications, announces a new technology, Single (1×1) and Quad (1×4) Port ICMs. The MagJack® ICMs can transmit/receive 0 to 60W of power per port over all 4 pairs within the Ethernet […]
RNCF series expands 0201 size resistance value range
Stackpole recently expanded the resistance value ranges of the 0201 chip size of the RNCF Series of precision thin film chip resistors. Resistance values from 49.9 ohm to 33K ohm are now available in tolerances as tight as 0.5% and TCR as low as 25 ppm. With the proliferation of consumer electronics and the desire […]
- 1
- 2
- 3
- …
- 37
- Next Page »
