A new PCI Express test solution supports the Gen5 Base Specification Stressed Receiver Test. The test setup features the Signal Quality Analyzer-R MP1900A Series with installed Automation Software for base specification calibration and BER Measurement Software supporting the SKP Filter. With the release of this system, engineers can easily configure a measurement environment for early-stage […]
Keysight Technologies announced that Sprint has selected Keysight’s 5G network emulation solutions to validate the performance of 5G new radio (NR) mobile devices, accelerating U.S. 5G commercial deployment of fixed wireless access (FWA) and enhanced mobile broadband (eMBB) applications. This collaboration leverages Keysight’s 5G Protocol and RF Carrier Acceptance Toolsets – part of the company’s suite…
Qualcomm Technologies, Inc. a subsidiary of Qualcomm Inc., has accepted Anritsu’s Radio Communication Test Station MT8000A and CATR Anechoic Chamber MA8172A as a validated test method to conduct 5G measurements. The Anritsu solution can be used to perform millimeter-wave (mmWave) beam characterization and beam verification tests for the Snapdragon X50 5G modem using Qualcomm Technologies’ […]
5G Standalone (SA) connection testing has successfully taken place between Anritsu’s Radio Communication Test Station MT8000A and a mobile smartphone form-factor test device from Qualcomm Technologies, Inc., a subsidiary of Qualcomm Inc. The tests included Anritsu’s 5G modem and antenna modules with integrated RF transceiver, RF front-end and antenna elements. This latest milestone follows previous […]
The 64-Gbaud PAM4 Pulse Pattern Generator (PPG) and 32-Gbaud PAM4 Error Detector (ED) modules support 400 GbE and Over 400G bit error rate (BER) tests for Anritsu’s Signal Quality Analyzer-R MP1900A BERT. With the modules installed, the MP1900A provides engineers with high signal quality and excellent Rx sensitivity to more accurately verify the performance of […]
Signal integrity applications commonly utilize balanced/differential transmission lines that are typically characterized using vector network analyzers (VNAs). This white paper offers guidance to signal integrity designers on the differences between the superposition and true-balanced approaches and which one may best fit their need.
Two software packages for the Anritsu Universal Wireless Test Set MT8870A support 3GPP-compliant tests on 5G sub-6 GHz New Radio (NR) chipsets, devices, and systems. Part of Anritsu’s on-going development of test solutions to aid in the rollout of 5G, the new software, coupled with the MT8870A’s best-in-class measurement speed, can lower test costs and […]
Anritsu Co. has come out with 2×2 MIMO Measurement Software MX886200A-010 that extends the measurement capability of its Wireless Connectivity Test Set MT8862A. With the software installed, the MT8862A is said to be the world’s first solution that supports output signal quality, transmit power, receiver sensitivity, and 2×2 MIMO measurements on IEEE802.11ac WLAN equipment under […]