Rohde & Schwarz has increased the maximum measurable frequency of its three-path diode power sensors to 67 GHz. The three-path technology enables extremely fast and accurate power measurements with a high-sensitivity, portable instrument of minimum size and weight. This frequency extension makes high-speed power measurements possible for additional applications such as IEEE 802.11ay and 802.11ad […]
Test and Measurement Tips
Multifunctional 16-bit AWG features innovative architecture, digital pattern generation
The Teledyne LeCroy T3AWG3252 Multifunctional 16-bit Arbitrary/Function Generators are designed with an innovative architecture that features synchronized analog signal and digital pattern generation. This multifunction 250-MHz arbitrary/sweep/function generator combines multiple functions in a single instrument, including a two-channel function and arbitrary waveform generator with an eight-channel digital pattern generator. These three instrument functions are based […]
Alarm card handles fan, voltage monitoring and control
An alarm card that can be used in various OpenVPX, VME/VME64x, CompactPCI, cPCI Serial and other open standard architecture chassis platforms provides the system with basic monitoring and control functions including; voltage levels, power supply health, temperature and fan monitoring/control. The board monitors the four common power rails in Eurocard-based systems of 5, 3.3, 12, […]
Basics of digital oscilloscope architecture
A digital storage oscilloscope (DSO) is characterized by the presence of a microprocessor, which is physically and functionally at the heart of the processing section. Other stages in the processor are the acquisition memory, at its input and the display memory at its output. The DSO’s signal paths (one for each channel) begin at the […]
Source measure units excel at high-accuracy, high-resolution testing
Three new Source Measure Units (SMUs) are designed for test applications that require high accuracy, high resolution and measurement flexibility, including current-voltage (I-V) characterizing and testing semiconductors, as well as other non-linear devices and materials. SMUs are electronic instruments capable of sourcing and measuring at the same time. They can precisely force voltage or current […]
Handheld vector network analyzer works up to 26.5 GHz
The R&S ZNH is a full two-port handheld vector network analyzer up to 26.5 GHz with cable and antenna analysis and full S-parameter measurements. Both of these functions are included free of charge. The R&S ZNH is user-friendly, easy to configure and has a compact fanless housing for field applications. The R&S ZNH handheld vector […]
PC-based scopes feature 20-MHz bandwidth, 80 MS/sec sampling speed
The new PicoScope 4000A Series PC-based oscilloscopes is a second-generation upgrade and expansion of Pico’s high-resolution, deep-memory product portfolio. With two, four and eight-channel models available, the PicoScope 4000A Series boasts 12-bit hardware resolution (to 16 bits with Resolution Enhancement), 256-MS-deep capture memory, 20-MHz bandwidth with 80 MS/sec sampling speed, up to 70 dB SFDR […]
PC-based scopes provide up to eight 12-bit channels
The PicoScope PS4000A Series of 20-MHz USB 3.0-connected PC oscilloscopes provide two, four, or eight high-resolution analog channels. These portable scopes have a compact footprint with BNC connectors that accept all common probes and accessories. With a high vertical resolution of 12 bits, 20-MHz bandwidth, 256-MSa buffer memory, and a fast sampling rate of 80 […]
Measuring the behavior of electronic filters
Passive electronic filters are composed of one or more passive components including resistors, inductors and capacitors. In contrast, active electronic filters also contain an amplifier composed of transistors or op-amps. The point of electronic filters is to pass some frequencies while blocking others. Depending upon the configuration, they selectively attenuate high frequencies (low pass), low […]
Monochromater boasts better wavelength accuracy and overall precision
The Oriel CS260B is a high-performance 1/4m configured monochromator that is a candidate for research applications and production environments. Each CS260B monochromator is a fully assembled, turn-key instrument and ready for immediate use. It leaves the factory pre-aligned and calibrated. Available options include different wavelength ranges, grating configurations and single or dual output ports. The […]