Part 1 of this FAQ looked at the basic issues associated with cooling and heat sinks. Part 2 focuses on the various heat sinks available. Q: Are heat sinks limited to a single component such as an IC? A: No, there are heat sinks which fit entire unit or chassis cool such as those which […]
FAQ
Synthesized tuning, Part 2: Advanced synthesizers and performance
Part 1 of this FAQ looked at the basic issues and topologies related to the challenge of frequency synthesis. Part 2 continues with advanced approaches and their attributes, as well as general concerns when choosing a synthesizer. Q: Are there other digitally-controlled synthesizer topologies? A: Yes. A widely used one is called the classical phase […]
Analog and digital modulation and modulation measurements
In amplitude modulation (AM), the amplitude of a carrier wave whose frequency remains constant changes in response to the modulating signal. In frequency modulation (FM), it is the frequency of the carrier that varies with the amplitude of the modulating signal. The carrier frequency deviates more when the modulating signal amplitude is higher. There are […]
Taking resistor technology beyond RoHS
By Stephen Oxley, Senior Engineer Applications and Marketing, TT Electronics Lead has long been recognized as a serious environmental hazard. It has a detrimental effect on the workings of the human central nervous system, and this is particularly acute when children are exposed to it. Based on the findings of scientific research conducted during the […]
Choosing a capacitor? Ripple current capability matters as much as Farads
by Derick Stephens, KEMET Corporation Selecting capacitors for decoupling and filtering in power circuits may seem like a basic chore for electronics designers. Getting it right, however, can critically influence reliability and longevity, but is complicated by the fact that parameters tend to change with factors such as the temperature and operating frequency. Proper attention should […]
Heat sinks, Part 1: Thermal principles
A heat sink is a non-electronic, passive mechanical component that has a vital role in the reliability and performance of ICs, PC boards, modules, chassis, and more. Heat sinks often don’t get much attention, at least not in the early stages of a design. This FAQ will look at the basic thermal principles of these […]
Synthesized tuning, Part 1: Basic frequency-synthesizer principles
Frequency synthesizers of various architectures, made possible by IC technology, are a key building blocks for applications which must accurately tune multiple channels, and hop from one frequency to another while using a single signal source such as a crystal oscillator. When you want to tune a desired radio station — AM or FM — […]
Challenges in designing electronics for satellites
In 1957, the Russians launched Sputnik 1, which was no more than a metal ball containing a radio, a battery, and a thermometer.[i] However, this experiment provoked a spark that led to decades of space missions. The earliest satellite designs were huge, heavy, and functionality was limited. Nevertheless, satellite designs started evolving with the passage […]
Three-phase testing basics – Mitigating harmonic current
An electrical conductor warms up when it conveys current. If the heat is high enough the conductor can be damaged, so it is beneficial to limit current flow. Three-phase electrical distribution systems are highly effective in limiting current flow without reducing the amount of power delivered to the load. They do this by separating phases […]
3D NAND Flash memory: Making HDDs obsolete in a data-centric world
A data-centric economy is evolving. The Samsung Galaxy Note 9 debuted with 8 GB RAM and one terabyte (TB) of storage (purchasing a 512 GB SD card bumps it to 1 TB). The price tag is well over $1,000, so the rest of us will have to buy 1 TB of cloud storage from Google […]