EPC announces the availability of the EPC9146, a 400 W motor drive demonstration. The EPC9146 power board contains three independently controlled half-bridge circuits, featuring the EPC2152 monolithic ePower Stage with integrated gate driver, 80 V maximum device voltage, 15 A (10 ARMS) maximum output current. The inverter board measures just 81 mm x 75 mm […]
EPC
Lidar laser IC includes 40-V, 10-A FET, integrated gate driver, LVDS logic-level input
EPC announces the introduction of a laser driver that integrates a 40 V,10 A FET with a gate driver and low-voltage differential signaling (LVDS) logic level input in a single chip for time-of-flight lidar systems used in robotics, drones, augmented reality, and gaming applications. The EPC21603 is a laser driver that is controlled using LVDS […]
Laser driver IC targets lidar time-of-flight apps
EPC announces the introduction of a laser driver that integrates a 40 V, 10 A FET with integrated gate driver and 3.3 logic level input in a single chip for time-of-flight lidar systems used in robotics, surveillance systems, drones, autonomous cars, and vacuum cleaners. The EPC21601 is a laser driver that is controlled using 3.3 […]
eGaN DC-DC demo board comes in tiny 1/16th brick size
EPC announces the availability of the EPC9157, a 300 W DC-DC demo board in the tiny 1/16th brick size, measuring just 33 mm x 22.9 mm x 9mm (1.3 x 0.9 x 0.35 in). The EPC9157 demo board integrates the Renesas ISL81806 80 V dual synchronous buck controller with the latest-generation EPC2218 eGaN FETs from […]
eGaN demo board covers 48-V dc-dc conversion
EPC announces the availability of the EPC9148 and EPC9153 demonstration boards for 48 V DC-DC conversion. The EPC9153 is a 250 W, extremely thin, power module using a simple, low-cost synchronous buck configuration delivering a 98.2% peak efficiency with a maximum component height of 6.5 mm. The EPC9148 utilizes a multilevel topology enabling a maximum […]
eGaN 200-V FETs sport low on resistance, small package size
EPC advances the performance capability while lowering the cost of off-the-shelf gallium nitride transistors with the introduction of the EPC2215 and EPC2207 200 V eGaN FETs. The applications for these leading-edge devices include class D audio, synchronous rectification, solar MPPTs (maximum power point tracker), DC-DC converters (hard-switched and resonant), and multilevel high voltage converters. The EPC2215 […]
Reliability report covers gallium-nitride power semiconductors
EPC announces its Phase Eleven Reliability Report, documenting the strategy used to achieve a remarkable field reliability record. This strategy relied upon tests forcing devices to fail under a variety of conditions to create stronger products to serve demanding applications such as lidar for autonomous vehicles, LTE base stations, vehicle headlamps, and satellites to name […]
eGaN FET gets automotive AEC Q101 qualification
EPC announces successful AEC Q101 qualification of the 80 V EPC2214 designed for lidar systems in the automotive industry and other harsh environments. eGaN technology has been in mass production for over nine years, accumulating billions of hours of successful field experience in automotive applications, such as lidar (Light Detection and Ranging) and radar for […]
How eGaN transistor technology improves Lidar performance
Alex Lidow from EPC recently filmed a video with us covering Lidar, a hot subject right now for autonomous vehicles. One of the biggest applications for eGaN is driving these lasers. The reason is that automakers want to see a long distance with a high degree of accuracy. To do that, the laser in a […]
Graphics-intensive apps get more juice from GaN dc/dc converters
Alex Lidow from EPC recently did a short video with us covering a brand new GaN-based DC-DC converter that’s super small and efficient. Lidow says EPC has been working to improve GaN-based dc/dc conversion for about eight years. They had to overcome a lot of barriers to do so because when they first started, there […]
