TE Connectivity (TE) released its new KILOVAC EV600 high voltage DC contactors. Hermetically sealed and designed for harsh environments, EV600 contactors are rated to handle more current than the widely-used EV200/LEV200 contactors without taking up additional space on the board. Rated for 600-amps, TE’s EV600 is the latest addition to the KILOVAC high-performance contactor line. […]
The role of sensors in IoT networks, Part 2: Smart sensors and how to choose
Part 2 of this series continues with answering common questions about how sensors work in IoT system development. What are smart sensors? Basic sensors can detect changes in their environments and convert measured data into a digital format for the external microcontroller to process. The “smart” is in the microcontroller. Combining the microcontrollers in a […]
Sliver straddle-mount connectors support Open Compute Project NIC 3.0
TE Connectivity has introduced its new Sliver straddle-mount connectors, which are the new standard form factor supporting a faceplate-pluggable Open Compute Project (OCP) NIC 3.0. A new extension of the Sliver product line, these straddle-mount connectors were designed to be useful for OCP NIC 3.0 cards in a low profile for ease of system maintenance […]
Exploring connectors for the industrial IoT
Industrial IoT (IIoT), or Industry 4.0, is revolutionizing the way factories, suppliers and customers share their digital knowledge. From process control and automotive assembly, to robotics and the food and beverage industry, the concept behind Industry 4.0 touches all industries. However, the benefits of IIoT are not available at the flick of a switch. To […]
QSFP-DD connectors, cages and assemblies support 400 Gbps speeds
TE Connectivity has introduced its new Quad Small Form Factor Pluggable Double Density (QSFP-DD) connectors, cages and cable assemblies, which address next-generation data center needs by increasing density through an existing QSFP form factor to reach speeds up to 400 Gbps. This 8 lane solution is designed for both 28G NRZ and 56G PAM-4 protocols, […]
New VAL-U-LOK connectors increase current ratings to 13 A
TE Connectivity has introduced an extension of its VAL-U-LOK connector product line that increases the maximum current rating from 9 to 13 A in the broadly accepted 4.2-mm centerline spacing connector system. TE’s new 13A VAL-U-LOK connectors support high current requirements for wire-to-board and wire-to-wire connections in a wide range of applications where power must […]
TE Connectivity to acquire First Sensor AG
TE Connectivity Sensors Germany Holding AG of TE Connectivity Ltd. Will purchase First Sensor AG, a provider of sensing solutions based in Germany. TE Holding, TE, and First Sensor have also entered into a business combination agreement which outlines parameters to facilitate the combination. The management board and supervisory board of First Sensor welcome and, […]
Sliver edge card connectors adopted as standard for SNIA specs
TE Connectivity (TE) announced its new Sliver card edge connectors have been adopted as the standard connector design into the SNIA (Storage Networking Industry Association) Small Form Factor Technology Work Group’s SFF-TA-1002 specification and are the highest-performing card edge connectors in the standard. TE’s industry-leading SFF-TA-1002 compliant connectors are protocol-agnostic, multi-lane connectors that are useful […]
Sliding power connector allows for easy hot swapping of components in server drawers
TE Connectivity has introduced a sliding power connector. This is one of the only connectors of its kind that allows for hot swapping (serviceability) of components in a server drawer without shutting power down to the entire system. Designed for applications such as hard disk drives, power supply units, racks, servers, storage units and other […]
Multigig RT 3 backplane connector exceeds 25 Gb/sec
TE Connectivity (TE), Harrisburg, Pa., has launched its fastest rugged backplane connector, the MULTIGIG RT 3 connector. TE’s MULTIGIG RT 3 connectors support speeds of 25-plus Gb/sec, making them among the fastest rugged backplane connectors for embedded computing or VPX systems currently on the market. The ruggedized design makes these connectors ideally suited to withstand […]
- 1
- 2
- 3
- …
- 5
- Next Page »
@eeworldonline
EE World Online
YouTube
Instagram