Samtec now offers a 75 Ohm High-Density BNC solution (HDBNC Series) with an exclusive, balanced right-angle design ideal for high volume pick-and-place manufacturing (-BM1D & -BM2D die-cast options). Designed primarily for use in advanced broadcast video equipment, Samtec HDBNC Series was tested to the latest SMPTE 2082 12G-SDI pass/fail specifications, with return loss measurements surpassing […]
Rad-hard GaN transistors sport super-low on resistance
EPC announces the introduction of the EPC7019 radiation-hardened eGaN FET. The EPC7019, a 40 V, 1.5 mΩ, 530 APulsed, rad-hard eGaN FET in a small 13.9 mm2 footprint. The EPC7019 has a total dose rating greater than 1 Mrad and SEE immunity for LET of 85 MeV/(mg/cm2). These devices are offered in a chip-scale package, […]
Reference design covers automotive in-cabin wireless charging stations
Renesas Electronics Corporation released a next-generation customer reference design for automotive wireless charging stations. The new P9261-3C-CRBv2 provides industry-leading features that enable automotive manufacturers to quickly and efficiently deliver premium performance and safety features for in-cabin wireless charging. The P9261-3C-CRBv2 solution includes the automotive-qualified wireless power controller P9261 with MP-A13 3-coils reference design as the wireless […]
300-W ac/dc supplies handle industrial, automation, ITE apps
TRACO POWER announces their new TPI 300 series of 300W high-density AC/DC power supplies available in two packages, a conduction-cooled baseplate or fully enclosed with a fan. Designed for a wide range of OEM / Embedded and Industrial applications where long-term reliability is critical and space is limited. Features include: TPI 300L-M open-frame / baseplate […]
SMD zero-ohm jumpers handle over 70 A
Zero-ohm jumpers are widely used in all types of electronic circuits for a wide range of markets and end products. They make circuitry routing easier and simplify manufacturability. However, jumper requirements for higher current levels frequently exceed the capability of general-purpose jumpers, and even some jumpers are classified by the manufacturer as “high current.” Stackpole’s […]
Ultra thin, 3 m dielectric film for high-heat SiC inverter technology
SABIC will introduce at the 2022 Applied Power Electronics Conference (APEC) in booth #1718, a new, thinner gauge of its ELCRES HTV150A dielectric film which may be used for capacitors in the traction inverters, onboard chargers, and electrical compressors of hybrid, plug-in hybrid and battery electric vehicles (xEV). The 3-micron (µm) film is 40 percent […]
Notch filters boast built-in ESD protection function
TDK Corporation announces the release of its newly developed AVRF041A150MT242 and AVRF061D2R4ST532 notch filters with ESD protection function. Volume production of these devices will begin in March 2022. The new notch filters are compliant with the IEC61000-4-2 Level 4 immunity standard. They are well suited to ensuring EMC requirements are met in the audio circuits […]
448-FPS vision system drives 15 cameras via Intel MPU platform
Xailient specializes in extremely efficient low-power computer vision. OpenVINO specializes in maximizing the performance and speed of computer vision AI workloads. Together, Xailient and OpenVINO deliver every inference of Computer Vision on all configurations of Intel hardware, from microwatts to Gigawatts, efficiently and super fast. Intel OpenVINO improved Xailient FPS 9.5x on Intel hardware – […]
Industrial computers based on Raspberry Pi computer module 4 platform
OnLogic is now accepting pre-orders for their new Factor 201 industrial computer. They’ve also released details about their forthcoming Factor 202. Both devices are powered by the Raspberry Pi Compute Module 4. The Factor 201 is compact, passively cooled, and intended for use as an industrial gateway, automation controller, or edge computer. It features an operating temperature range of […]
GMR crankshaft and camshaft sensors optimized for HEV engine platforms
Allegro MicroSystems, Inc. announced the release of two new state-of-the-art giant magnetoresistances (GMR) crankshaft and camshaft sensors. The ATS16951 (crankshaft) and ATS16351 (camshaft) sensors are unique in the market and provide manufacturers with a single-vendor solution that’s ideal for hybrid vehicle engines, with use cases extending to two-wheelers, off-road vehicles, and application designs requiring extended air gap performance. […]